The reasons could be Power Supply issues, Power Management settings, Outdated or damaged USB drivers and damaged USB Ports.
Remove the pin from the hole and reconnect the pad to your PC or console, it should now be detected.Hi there! I am Louie, a Microsoft Community member and a fellow Windows 10 user like you. You can close the software and unplug the dongle from the PC.
Do not unplug the dongle before the end of the update process! Please wait until the software is done updating the dongle.
Each paddle can replace one or several of the fllowing buttons : buttons 1, 2, 3, 4, L1, R1, R2, L2, right stick, left stick, directional cross (up/down/left/right).Pushing M1 now will work as if pressing L1 and R2. Press the buttons you want to map, say L1 and R2.Keep M1 paddle pressed then push Share, the Turbo LED stays lit, programming mode is on.Mode B Macro : programmed macro chains can be set up on a single paddle. Mode A Remapping : 1 or more buttons can be set to 1 paddle
The M1, M2, M3 and M4 paddles at the back of the pad can be given the same function as any action button.The M1 M2 M3 M4 paddles can map a maximum of 14 buttons. Once you have heard a notification sound, simultaneously press the Option + PS buttons of your controller until you hear another notification sound. Plug the USB cord into the dedicated socket on your PC. Press the HOME button to access your console's menus. When the light bar stops flashing, synchronization is over. Plug the USB cord into the dedicated socket on your PS4 TM console. A step-by-step method can be found at the bottom of this page.ĬONNECTING THE CONTROLLER TO YOUR CONSOLE Please note: if the following method doesn't work, you may need to update your pad's firmware.